Products
Ref : 1001813 - 510S2 SONESSE 10/32 SJTW 3M UN
Sonesse® 510S2
ULTRA-quiet, ULTRA-strong
Experience all the benefits of the Sonesse® range for large multi-banded/coupled window covering applications.
Applications | ||
---|---|---|
Exterior Solar Screens / Interior Window Coverings : Shades / Projection screen | ||
Embedded Technologies | Warranty | |
Wired | 5 years |
Product benefits
Multiple Applications
- Interior, Exterior, Residential, and Commercial.
Simple Installation & Setup
- Compatible with leading industry hardware.
- Can be mounted in the bracket six different ways.
- Features a "snap-on" style connection for roller tube adaptors.
- Interchangeable power cords, or a quick connector with extension options, provide multiple power cord lengths to meet installation demands.
- Limits can be set using mechanical rapid adjustment.
- Suitable for tubes diameter 47mm or more (internal diameter).
Compatibility
- Compatible with wired control options.
- Easily integrates with third-party control systems.
- No power consumption when motor is idle, a green solution.
26.1*
kg CO2
The carbon impact of the 510S2 SONESSE 10/32 SJTW 3M UN is 26.1kg CO2
What is the carbon footprint?
The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.
Details and specifications
Weight (with packaging) : 5.31 lb
Comfort & Convenience
- Convenient solution for glare reduction and privacy.
- Superior performance, reliability and ease of operation.
- Close and open all window treatments with a single gesture.
Quiet
- At the office or at home, silence is a key factor for well being. The Sonesse® range offers an added value of acoustic performance to quality and compatibility.
Energy Savings
- Energy costs reduction and protecting furnishings from damaging UV rays.
- Utilize timers to schedule daily open and close times.
- Add sensors that react to the sun's intensity & positioning.
Other documents & links
Installation information
Act for Green
Technical information
Approval |
---|
UR |
Standard |
|
---|---|
Protection Index | IP 44 |
Insulation class | I |
Dimension |
|
---|---|
Unwrapped product weight | 6.57 lb |
Unwrapped length | 24.25 in |
Minimum internal diameter | 1.85 in |
External Diameter | 1.77 in |
Diameter | 1.97 in |
Riveting position distance | 23.23 in |
Electrical |
|
---|---|
Consumption during operation | 200 W |
Minimum voltage | 108 V |
Maximum voltage | 132 V |
Rated current | 1.67 A |
Power supply | AC - RGE 2 - 120V/60HZ |
Mechanical |
|
---|---|
Speed | 32 rpm |
Torque | 10 Nm |
Type of limit switch unit | Rapid mechanical |
Capacity of the limit switch unit (turns) | 46 |
Power scale | AC MOTOR SINGLE PHASE 37,5W TO 750W |
Repeatabilty | +/- 5 |
Head type | STAR |
Cable |
|
---|---|
Cable type | SJTW |
Cable length | 9.84 ft |
Cable color | WHITE |
Number of wires of the cable | 4 |
Cable plug ends | STRIPPED |
Wire section | 0.0013 in² |
Other |
|
---|---|
Minimum working temperature | -4 °F |
Maximum working temperature | 140 °F |
Minimum storing temperature | -4 °F |
Maximum storing temperature | 176 °F |
Thermical time | 4 min |
Noise level (dB) | 47.2 dB |
End Product |
|
---|---|
End Product Type | Roller blinds, Roman blinds, Pleated and cellular blinds, Venetian blinds, Projection screens, Zebra blinds |
Accessories
151 Product(s)Ball Support for 9410803 and 9028665
Réf. 1781030
Cord Take-Up Reel for 56mm Tube
Réf. 1781899
DS70 LT50 Set (0.8mm - 1mm Kit)
Réf. 9012237
Intermediate Bracket Wall Mount 55P
Réf. 9014240
Non-Adjustable Intermediate Bracket 55P
Réf. 9014684
Sonesse® 50 Pin End Cap 10mm - Quiet Accessory for 2" Tube
Réf. 9016628
LT50 Crown 70mm Rollerbat
Réf. 9026982
Grey WAGO AC Quick Connector (4 pins)
Réf. 9027664
2" (47mm) Round Drive "Hard Clip"
Réf. 9206088
Anti-Vibration Motor Bracket
Réf. 9410739
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
2.75" (67mm) Round Crown
Réf. 9707031
Motor Bracket with Spring Ring - Square (120mm x 120mm)
Réf. 9763503
Idler Bearing for 12mm Shaft
Réf. 1781015
Take-Up Reel for 2" Tube
Réf. 1781151
2.75" (67mm) Round LT50 Set "Hard Clip"
Réf. 9012232
P72 LT50 Set
Réf. 9012235
Fast Connector Extension Cable 4C SJTW - 8.4 ft.
Réf. 9021118
Tool for WAGO AC Quick Connector
Réf. 9027663
Cable Guide for 63mm x 1.5mm (approx 2.5") Tube
Réf. 9146071
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
LT50 Idler Bracket with 10mm Hole Nylon Bearing
Réf. 9410635
Light Duty Angle LT50 Type
Réf. 9410637
LT50 Universal Motor Bracket (50Nm Max)
Réf. 9410651
Idler Bracket with 12mm ID (Anti-Vibration)
Réf. 9410740
Heavy Duty Angle Bracket for 9430610
Réf. 9420604
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
Universal End Cap - Collapsible 10mm Shaft (Shorter Pin than Item 9420800)
Réf. 9420814
Screw for Standard LT50 Motor
Réf. 9670013
2.0" Plastic Idler End Cap - 10mm Shaft
Réf. 9700958
AMA/P71 LT50 Crown
Réf. 9997118
56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - Mill Finish
Réf. 1780743
RollEase 3.25" (83mm) Profiled Tube
Réf. 1782096
LT50 Adjustable Universal Motor Bracket
Réf. 9002550
70mm Octagonal LT50 Set
Réf. 9012234
LT50 Angle Plate for Motor Bracket
Réf. 9012250
Flexible Intermediate Bracket Kit for Angle up to 30
Réf. 9012318
Idler Bracket Kit 10mm (Ball & Holder)
Réf. 9012657
Non-Adjustable Idler End Bracket 55P
Réf. 9014683
RollEase “Silent Pin" Crown Only for RollEase 2.5" (63mm) Tube
Réf. 9016856
Sonesse® 50 & LT50 Motor Pigtail to Fast Connector SJTW 4C Cable - 1.6 ft.
Réf. 9020804
Intermediate Bearing Support for 1781018
Réf. 9146011
Pull Off Tool for Spring Ring
Réf. 9206015
LT50 2" Universal Intermediate Bracket Kit
Réf. 9410648
3.5" Round LT50/60 Drive (89mm x 2mm)
Réf. 9420303
Heavy Duty End Cap Shaft
Réf. 9420674
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
Heavy Duty Idler Bracket with Idler End Cap Holder
Réf. 9430603
Idler End Cap Holder (Anti-Vibration)
Réf. 9540786
2.5" (60mm) Round Crown
Réf. 9707026
DS 70 LT50 Crown
Réf. 9707034
Universal Motor Bracket (Metric) with Spring Ring and Threaded for M8 and M6 Bolts
Réf. 9910001
Drive Stop and Screw
Réf. 9910004
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
2.5" (60mm) Round LT50 Set "Hard Clip"
Réf. 9012231
Flexible Intermediate Bracket Kit for Angle up to 45
Réf. 9012319
Intermediate Female Idler End Plug, 0-90 Degrees (for 56mm Acmeda tube)
Réf. 9014123
Sonesse® 50 Drive (for 56mm Acmeda Tube 10Nm Max)
Réf. 9014126
Sonesse® 50 Adjustable Idler End Bracket - Wall Mount 55P
Réf. 9014238
Sonesse® 50 & LT50/LT60 SJTW 4C Cable - 10 ft.
Réf. 9018345
LT50 Crown 80mm Rollerbat
Réf. 9019555
Sonesse® ULTRA 50 Universal Pin End Cap - 12mm
Réf. 9019717
2.0" Fabric/Cord Clip
Réf. 9138028
LO LT50 Motor Bracket with Stud (25 Nm max.)
Réf. 9206020
2" (47mm) Round Drive "Soft Clip"
Réf. 9206089
LT50 Idler Bracket with 12mm Hole Nylon Bearing
Réf. 9410633
Anti-Blocking System (ABS) 500 Series Left Rotation
Réf. 9705415
Sonesse® 50 Adjuster Tool (for Idler Brackets and End Plugs)
Réf. 1780742
56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - White Powder Coat
Réf. 1780744
DS 74 LT50 Set
Réf. 9012238
Modified LT60 DS 78 Drive (Key Way Widened)
Réf. 9012241
2" Collapsible End Cap (Silent) - 10mm Shaft
Réf. 9013592
Intermediate Male Idler End Plug (for 56mm Acmeda tube)
Réf. 9014114
Intermediate Female Idler End Plug (for 56mm Acmeda tube)
Réf. 9014121
RollEase “Silent Pin" Crown & Drive Adaptor for 3.25" (83mm) Tube
Réf. 9016855
RollEase “Silent Pin" Idler End Pin
Réf. 9016857
Sonesse® 50 Drive Wheel 50mm x 1.5mm Soft Clip- Quiet Accessory for Sonesse® Motors
Réf. 9018455
Sonesse® 50 & LT50/LT60 SJTW 4C Cable - 24 ft.
Réf. 9021046
Fast Connector Extension Cable 4C SJTW - 4.4 ft.
Réf. 9021117
Fast Connector Extension Cable 4C SJTW - 16.4 ft.
Réf. 9021120
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
Idler End Cap without Shaft 2.0" OD with M5 Screw
Réf. 9129631
2.5" Round LT50 Drive "Hard Clip"
Réf. 9206019
LO LT50 Motor Bracket with Stud (25 Nm max.)
Réf. 9206021
Spring Ring
Réf. 9206033
LT Motor Bracket
Réf. 9410665
Heavy Duty Angle Plate with Universal Motor Bracket (Max 85Nm)
Réf. 9420602
Motor Bracket "U" Shape
Réf. 9510658
2.5" 60mm Octagonal Crown
Réf. 9707025
LT Compact ST Motor Bracket PA66 with Spring Ring
Réf. 9708461
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
Motor Bracket with Spring Ring - Square (100mm x 100mm)
Réf. 9763508
Cord Fastener for 56mm Tube
Réf. 1781408
LT50 Intermediate Bracket with 16mm ID Bearing
Réf. 9002541
2.5" Fabric/Cord Clip
Réf. 9012201
70mm Octagonal LT50 Crown
Réf. 9012328
Sonesse® 50 Adjustable Idler End Bracket - Ceiling Mount 55P
Réf. 9014110
Intermediate Bracket Ceiling Mount 55P, 0-90 Degrees
Réf. 9014122
Sonesse® 50 Crown (for 56mm Acmeda Tube 10Nm Max)
Réf. 9014125
70mm LT50 Crown
Réf. 9016298
Sonesse® 50 Drive Wheel 50mm x 1.5mm Hard Clip- Quiet Accessory for Sonesse® Motors
Réf. 9016630
RollEase “Silent Pin" Idler Bracket (Wall and Ceiling Mount) (White)
Réf. 9016859
Sonesse® ULTRA 50 Universal Pin End Cap - 10mm.
Réf. 9019716
2.0" Tube - 10mm Shaft End Cap
Réf. 9128101
Idler End Cap without Shaft 2.5" OD with M5 Screw
Réf. 9129632
Weld-on Bracket without Spring Ring
Réf. 9206029
Roller Tube End Cap with 12mm Hole
Réf. 9701288
DS 78mm Round Drive
Réf. 9761001
DS 85mm Round Drive
Réf. 9761003
P72 LT50 Drive
Réf. 9761011
13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011
Réf. 1781018
2.0" Aluminum Tube (Minimum Order Length 20')
Réf. 1781148
White Plastic Cover for LT Bracket
Réf. 9002519
Idler Bracket 14mm ID
Réf. 9002540
4-Conductor Motor Cable SJTW (Sold per Foot)
Réf. 9012110
LT50 Adjustable Intermediate Support Bracket for 2" Tube
Réf. 9012203
60mm Octagonal LT50 Set
Réf. 9012233
Idler End Cap (for 56mm Acmeda Tube)
Réf. 9014097
Sonesse® 50 Star Head Motor Bracket 55P
Réf. 9014135
2.0" End Cap with 12mm Shaft
Réf. 9132087
Cable Guide for 50 x 1.5mm (approx. 2" ID) Tube
Réf. 9146035
LT50 Adjustable Angle Bracket
Réf. 9410639
LT50 HA Flush Mount Motor Bracket
Réf. 9410715
4.0" Round LT50 Drive
Réf. 9420304
Universal Motor Bracket with Spring Ring
Réf. 9420631
Nylon Ball Bearing and Holder with 12mm Hole for 9420604
Réf. 9430610
DS 78mm Round Crown
Réf. 9707027
DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005
13mm Square Drive Shaft - 12mm OD for End Cap
Réf. 1781009
2.5" OD Aluminum Tube (Minimum Order Length 16')
Réf. 1781343
DS 78 LT50 Set
Réf. 9012239
Intermediate Bracket Ceiling Mount 55P
Réf. 9014120
LT50 Drive 70mm Rollerbat
Réf. 9016059
RollEase “Silent Pin" Star Head Motor Bracket (White)
Réf. 9016858
Sonesse® 50 Pin End Cap 12mm - Quiet Accessory for 2" Tube
Réf. 9018228
LT50 Drive 80mm Rollerbat
Réf. 9019556
Fast Connector Extension Cable 4C SJTW - 22.4 ft.
Réf. 9021121
U Shaped Idler Bracket
Réf. 9127808
14mm Bearing Plate for Idler Bracket Kit
Réf. 9146007
Heavy Duty LT Intermediate Support Bracket
Réf. 9420673
Spring Ring with Loop
Réf. 9685025
Anti-Blocking System (ABS) 500 Series Right Rotation
Réf. 9705414
SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030
DS 85mm Round Crown
Réf. 9707035
60mm Octagonal Drive
Réf. 9751001
SM65 (63mm) Round Drive
Réf. 9751002
AMA/P71 LT50 Drive
Réf. 9751015
DS 78mm/R Round Drive
Réf. 9761005
Spring Ring with Locking Screw
Réf. 9910002
Universal Motor Bracket - US Threads
Réf. 9910021